Only logged in customers who have purchased this product may leave a review.
DTC-60
Diaphragm Type [Anti-corrosive Type]
- Pumping Speed: 60 L/min (50Hz), 70 L/min (60Hz)
- Ultimate Pressure: 1.0 × 10³ Pa
- Motor: Single phase, 220V, 200W
- Full Load Current: 2.1A
- Weight: 18.0 kg
- Inlet/Outlet Diameter: G3/8
- Dimensions: 158(W) × 340(L) × 242(H) mm
Related products
-
DAT-100S
Add to cartDiaphragm Type [Standard Type]
- Pumping Speed: 100 L/min (50Hz), 110 L/min (60Hz)
- Ultimate Pressure: 13.3 × 10³ Pa
- Motor: Single phase, 200–220V, 200W
- Full Load Current: 2.8A
- Weight: 11.0 kg
- Inlet/Outlet Diameter: Rc 1/4
- Dimensions: 212(W) × 278(L) × 224.5(H) mm
-
DTC-41E
Add to cartDiaphragm Type [Anti-corrosive Type]
- Pumping Speed: 40 L/min (50Hz), 46 L/min (60Hz)
- Ultimate Pressure: 1.0 × 10³ Pa
- Motor: Single phase, 220V, 100W
- Full Load Current: 1.1A
- Weight: 10.3 kg
- Inlet/Outlet Diameter: G3/8
- Dimensions: 155(W) × 336.5(L) × 217(H) mm
-
DOP-40D
Add to cartRocking Piston Type
- Pumping Speed: 40 L/min (50Hz), 44 L/min (60Hz)
- Ultimate Pressure: 1.2 × 10³ Pa
- Motor: Single phase, 220V, 210W
- Full Load Current: 1.4A
- Weight: 7.0 kg
- Inlet/Outlet Diameter: Rc 1/4
- Dimensions: 160(W) × 270(L) × 179(H) mm
-
DAP-12S
Add to cartDiaphragm Type [Standard Type]
- Pumping Speed: 12 L/min (50Hz), 14 L/min (60Hz)
- Ultimate Pressure: 24.0 × 10³ Pa
- Motor: Single phase, 220V, 10W, Capacitor run
- Full Load Current: 0.25A
- Weight: 1.9 kg
- Inlet/Outlet Diameter: Rc 1/8
- Dimensions: 91(W) × 163(L) × 100.6(H) mm
-
GN-10i Nitrogen Gas Generator
Add to cart- Purpose: Generates nitrogen gas (Nâ‚‚) with a purity of 99% (Nâ‚‚ + Ar) for various industrial applications.
- Nâ‚‚ Production Rate: 10 liters per minute.
- Discharge Pressure: 0.2 MPa.
- Dew Point: Below -60°C.
- Dimensions: 400 mm (W) × 460 mm (D) × 900 mm (H).
- Weight: Approximately 60 kg.
- Power Supply: 100 VAC, single-phase; power consumption of approximately 0.4 kW at both 50Hz and 60Hz.
- Cooling Method: Air-cooled; no external cooling water required.
- Typical Applications: General industrial uses requiring nitrogen gas.
Reviews
There are no reviews yet.