Only logged in customers who have purchased this product may leave a review.
“DAT-50D” has been added to your cart. View cart
DTC-22B
$0.00
Diaphragm Type [Anti-corrosive Type]
- Pumping Speed: 20 L/min (50Hz), 24 L/min (60Hz)
- Ultimate Pressure: 1.0 × 10³ Pa
- Motor: Single phase, 220V, 50W
- Full Load Current: 0.6A
- Weight: 7.3 kg
- Inlet/Outlet Diameter: G1/4
- Dimensions: 142(W) × 288.5(L) × 202(H) mm
Related products
-
DAP-6D
$0.00Add to cartDiaphragm Type [Standard Type]
- Actual pumping speed: 6L/min for 50HZ, 7L/min for 60HZ
- Ultimate pressure: 6.65 × 10^3 Pa
- Motor: Single phase, 220—230V, 10W, 4P, Capacitor run
- Full load current: 0.25A
- Weight 1.9 kg
- Inlet, outlet pipe diameter: Rc 1/8 mm
- Ambient temperature 0 – 40 ℃
- Overall dimensions 91(W) × 163(L) × 100.6(H) mm
-
Qulee Reactive Gas Monitor
$0.00Add to cart- Mass Range: 1 to 200 amu
- Resolution: M/ΔM = 1M (10% peak height)
- Sensitivity: 1×10⁻³ A/Pa
- Minimum Detectable Partial Pressure: 1×10⁻¹⁰ Pa
- Ion Source: Closed ion source with magnetic field
- Emission Current: 10 μA
- Bakeout Temperature: Maximum 120°C
- Pressure Range: 1×10⁻⁶ to 13 kPa
- Pumping System: Turbo molecular pump (67 L/s for N₂)
- Power Supply: AC 100V, 15A
- Weight: 57 kg (pumping system), 38 kg (controller)
-
DA-41D
$0.00Add to cartDiaphragm Type [Standard Type]
- Pumping Speed: 40 L/min (50Hz), 46 L/min (60Hz)
- Ultimate Pressure: 3.3 × 10³ Pa
- Motor: Single phase, 220V, 100W
- Full Load Current: 1.25A
- Weight: 10.3 kg
- Inlet/Outlet Diameter: Rc 1/4
- Dimensions: 157(W) × 336.5(L) × 217(H) mm
-
GN-10i Nitrogen Gas Generator
$0.00Add to cart- Purpose: Generates nitrogen gas (N₂) with a purity of 99% (N₂ + Ar) for various industrial applications.
- N₂ Production Rate: 10 liters per minute.
- Discharge Pressure: 0.2 MPa.
- Dew Point: Below -60°C.
- Dimensions: 400 mm (W) × 460 mm (D) × 900 mm (H).
- Weight: Approximately 60 kg.
- Power Supply: 100 VAC, single-phase; power consumption of approximately 0.4 kW at both 50Hz and 60Hz.
- Cooling Method: Air-cooled; no external cooling water required.
- Typical Applications: General industrial uses requiring nitrogen gas.
-
DA-30D
$0.00Add to cartDiaphragm Type [Standard Type]
- Pumping Speed: 30 L/min (50Hz), 36 L/min (60Hz)
- Ultimate Pressure: 6.7 × 10³ Pa
- Motor: Single phase, 200–220V, 200W
- Full Load Current: 2.8A
- Weight: 11.0 kg
- Inlet/Outlet Diameter: Rc 1/4
- Dimensions: 212(W) × 278(L) × 224.5(H) mm
Reviews
There are no reviews yet.